Reactive Oxygen Species Assay Kit -50101ES

YeasenSKU: 50101ES01

Size: 1000T
Sale price$1,106.00

Shipping calculated at checkout

Sold out
Bulk Quote Inquiry


Reactive Oxygen Species Assay Kit uses the cell permeant reagent 2’,7’–dichlorofluorescin diacetate (DCFDA) to quantitatively assess reactive oxygen species in live cell samples. The lipophilic non-fluorescent DCFDA readily crosses the cell membrane through passive diffusion followed by deacetylation. The deacylated product is an oxidant sensitive 2′,7′-dichlorofluorescein (DCHF). DCHF is oxidized later by ROS to form DCF. DCF is highly fluorescent and is detected by fluorescence spectroscopy or Flow cytometry with excitation/emission at 480 nm/525 nm. Rosup, a compound mixture, is a ROS inducer and can be used as a positive control.

Product Components

Component number





DCFH-DA (10 mM)

100 µL



Rosup (100 mM)

1 mL


Shipping and Storage

This kit is shipped with an ice bag. Store at -20°C without light for 1 year. Avoid repeated freezing and thawing.

Method of application

1. Reagent Preparation
DCFH-DA Solution: Briefly centrifuge at low speed before opening. Prepare a working DCFH-DA solution by diluting 10 mM DCFH-DA in serum free medium to make a 10 μM final concentration.

[Note]: DCFH-DA may also be diluted in media without phenol red. Use freshly prepared DCFH-DA solution, long term storage of diluted DCFH-DA is not recommended. The exact concentration of DCFH-DA required will depend on the cell line being used but a general starting range would be 10- 50 μM. For certain cells, if the fluorescence of the negative control (without DCFH-DA probe) is very strong, dilute DCFH-DA to 2-5 μM and shorten the incubation time  appropriately.
Rosup Solution: Prepare a 100 µM Rosup working solution by diluting 100 mM Rosup stock solution in serum free medium. Generally, incubation with Rosup at 37 ℃ for 30 min-4 h in dark can significantly increase ROS.
[Note]: The incubation time of Rosup will depend on the sensitivity of the cell line. For example, 30 min for Hela and 1.5 h for MRC5. If the increase of ROS is not observed within 30 minutes, the induction time or the concentration can be appropriately increased. If ROS rises too fast, the induction time or the concentration can be appropriately reduced.
Drugs: Prepare the drug of interest in complete media with 10% FBS or other appropriate solution to the desired concentration. 
2. Recommended protocol for Adherent Cells
a) Cell preparation: Grow adherent cells in standard cell culture media the day before the experiment so that cell confluence reaches 70% at the time of the experiment.
b) Drug induction: Remove the media. Overlay each well with previously prepared serum-free diluted drugs and incubate for the desired time at 37°C in the dark.
c) (Optional) Positive control: Overlay the positive control well with previously prepared Rosup solution and incubate for the desired time at 37°C in the dark.

[Note]: For cells with short stimulation time (usually within 2 hours), the probe can also be loaded first, and then add Rosup or a drug of interest.
d) ROS probe loading: Remove all the medium and wash cells with serum-free medium for 1-2 times. Overlay each well with previously prepared DCFH-DA Solution. Incubate at 37℃ for 30 min in the dark.
e) Remove the medium and wash cells 1-2 times with serum-free medium to remove free DCFH-DA.
3. Recommended protocol for Suspension Cells
a) Cell preparation: Grow suspension cells to approximately 1.5 × 105 cells per well on the day of the experiment.
b) Drug induction: Collect cells in a conical tube by centrifugation and resuspended them in an appropriate amount of previously prepared serum-free diluted drugs and incubate for the desired time at 37°C in the dark.
c) (Optional) Positive control: Resuspended the positive control cells with previously prepared Rosup solution and incubate for the desired time at 37°C in the dark.
d) ROS probe loading: Collect in a new tube and wash cells by centrifugation twice in PBS. Resuspended the cells with previously prepared DCFH-DA Solution with cell density at 1×106-2×107/mL. Then incubate at 37℃ for 30 min in the dark. Invert the tube every 3-5 minutes to ensure full contact between the probe and cells.

[Note]: The cell density should be adjusted according to the subsequent detection method. For example, for flow cytometry, the number of cells in a single tube should not be less than 104/mL or more than 106/mL. 
e) Collect and wash cells by centrifugation twice with serum-free medium to remove free DCFH-DA.
4. Fluorescence detection and Data Analysis
Fluorescent microscopy Measurement: Perform live cell microscopy with a filter set appropriate for fluorescein (FITC) using a fluorescence microscope. Visually score cells for brightness and compare between control and samples or use image analysis methods to compare signals between digital photographs of cells.
Flow Cytometry Measurement: The adherent cells should be collected with trypsin to prepare a single cell suspension; For suspension cells, the cells are collected directly. Ideally, 10,000 cells should be analyzed per experimental condition. Cells should not be overly dense during the experiment (<1 ×106 cells/mL). Exclude debris and isolate cell population ofinterest with gating. Using mean fluorescent intensity, determine fold change between control and treated samples with Ex/Em = 480/525 nm.
Fluorescent Microplate Measurement: Measure the plate immediately on a fluorescence plate reader at Ex/Em = 480/525 nm in end point mode in the presence of media. Subtract blank readings from all measurements and determine fold change from assay control.


1. Wash the cells after incubating with DCFH-DA to reduce background noise.
2. It is recommended to measure the fluorescence as soon as possible after incubation to avoid possible errors.
3. For your safety and health, please wear lab coats and disposable gloves for the operation.
4. For research use only!

Citations & References:

[1] Zhang M, et al. Conscription of Immune Cells by Light-Activatable Silencing NK-Derived Exosome (LASNEO) for Synergetic Tumor Eradication. Adv Sci (Weinh). 2022 Aug;9(22): e2201135. doi: 10.1002/advs.202201135. Epub 2022 Jun 4.   IF: 16.806

[2] Zhang D, et al. Microalgae-based oral microcarriers for gut microbiota homeostasis and intestinal protection in cancer radiotherapy. Nat Commun. 2022 Mar 17;13(1):1413. doi: 10.1038/s41467-022-28744-4. PMID: 35301299.  IF: 14.919

[3] Jiao D, et al. Biocompatible reduced graphene oxide stimulated BMSCs induce acceleration of bone remodeling and orthodontic tooth movement through promotion on osteoclastogenesis and angiogenesis. Bioact Mater. 2022 Feb 6; 15:409-425. doi: 10.1016/j.bioactmat.2022.01.021. PMID: 35386350; PMCID: PMC8958387.    IF: 14.593

[4] Guo G, et al. Space-Selective Chemodynamic Therapy of CuFe5O8 Nanocubes for Implant-Related Infections. ACS Nano. 2020 Oct 27;14(10):13391-13405. doi: 10.1021/acsnano.0c05255. Epub 2020 Sep 22. PMID: 32931252.   IF: 14.588

[5] Yang C, et al. Red Phosphorus Decorated TiO2 Nanorod Mediated Photodynamic and Photothermal Therapy for Renal Cell Carcinoma. Small. 2021 Jul;17(30): e2101837. doi: 10.1002/smll.202101837. Epub 2021 Jun 19. PMID: 34145768.   IF:13.281

[6] Xiaolu Chen, et al. Metal-phenolic networks-encapsulated cascade amplification delivery nanoparticles overcoming cancer drug resistance via combined starvation/chemodynamic/chemo therapy. Chemical Engineering Journal. 2022 Aug; 442:136221.    IF: 13.273

[7] Hao Ding, et al. Mesenchymal stem cells encapsulated in a reactive oxygen species-scavenging and O2-generating injectable hydrogel for myocardial infarction treatment. Chemical Engineering Journal. 2022.133511:1385-8947.  IF: 13.273

[8] Yu H, et al. Triple cascade nanocatalyst with laser-activatable O2 supply and photothermal enhancement for effective catalytic therapy against hypoxic tumor. Biomaterials. 2022 Jan; 280:121308. PMID: 34896860.   IF: 12.479

[9] Sun D, et al. A cyclodextrin-based nanoformulation achieves co-delivery of ginsenoside Rg3 and quercetin for chemo-immunotherapy in colorectal cancer. Acta Pharm Sin B. 2022 Jan;12(1):378-393. PMID: 35127393.    IF: 11.614

[10] Xiong Y, et al. Tumor-specific activatable biopolymer nanoparticles stabilized by hydroxyethyl starch prodrug for self-amplified cooperative cancer therapy. Theranostics. 2022 Jan 1;12(2):944-962. PMID: 34976222. IF: 11.556

[11] Gao J, et al. Mitochondrion-targeted supramolecular "nano-boat" simultaneously inhibiting dual energy metabolism for tumor selective and synergistic chemo-radiotherapy. Theranostics. 2022 Jan 1;12(3):1286-1302. PMID: 35154487.    IF: 11.556

[12] Zhong D, et al. Calcium phosphate engineered photosynthetic microalgae to combat hypoxic-tumor by in-situ modulating hypoxia and cascade radio-phototherapy. Theranostics. 2021 Jan 22;11(8):3580-3594. PMID: 33664849.  IF: 11.556

[13] Sun J, et al. Cytotoxicity of stabilized/solidified municipal solid waste incineration fly ash. J Hazard Mater. 2022 Feb 15;424(Pt A):127369. doi: 10.1016/j.jhazmat.2021.127369. Epub 2021 Sep 29. PMID: 34879564.   IF: 10.588

[14] Zhu C, et al. Multifunctional thermo-sensitive hydrogel for modulating the microenvironment in Osteoarthritis by polarizing macrophages and scavenging RONS. J Nanobiotechnology. 2022 May 7;20(1):221.  IF: 10.435

[15] Pan X, et al. Zinc oxide nanosphere for hydrogen sulfide scavenging and ferroptosis of colorectal cancer. J Nanobiotechnology. 2021 Nov 27;19(1):392. doi: 10.1186/s12951-021-01069-y. PMID: 34838036; PMCID: PMC8626909.    IF: 10.435

[16] He J, et al. Gold-silver nanoshells promote wound healing from drug-resistant bacteria infection and enable monitoring via surface-enhanced Raman scattering imaging. Biomaterials. 2020 Mar; 234:119763. PMID: 31978871.    IF: 10.317

[17] Cheng Q, et al. Nanotherapeutics interfere with cellular redox homeostasis for highly improved photodynamic therapy. Biomaterials. 2019 Dec; 224:119500. doi: 10.1016/j.biomaterials.2019.119500. Epub 2019 Sep 17. PMID: 31557591.   IF: 10.273

[18] Zhong D, et al. Laser-triggered aggregated cubic α-Fe2O3@Au nanocomposites for magnetic resonance imaging and photothermal/enhanced radiation synergistic therapy. Biomaterials. 2019 Oct; 219:119369. PMID: 31351244.    IF: 10.273

[19] Sun C, et al. Selenoxide elimination manipulate the oxidative stress to improve the antitumor efficacy. Biomaterials. 2019 Dec; 225:119514. doi: 10.1016/j.biomaterials.2019.119514. Epub 2019 Sep 24. PMID: 31569018.     IF: 10.273

You may also like